USA! Allen Amps

The Reignmaker™ with patent-pending FDM™ technology puts tonal control at your fingertips. Just turn the modulator knob to adjust speaker output and amplifier interaction, helping you find that sweet spot of saturated tube tone but at a significantly lower volume. Tweak the knob for a wide range of tones: More attenuation affords a warmer tone while less attenuation restores volume and brightness.

Nominal Basket Diameter
Nominal Impedance*
Power Rating Watts
Usable Frequency Range
Magnet Weight
Gap Height
Voice Coil Diameter

Recommended Enclosure
Driver Volume Displaced
Overall Diameter
Baffle Hole Diameter
Front Sealing Gasket
Rear Sealing Gasket
Mounting Holes Diameter
Mounting Holes B.C.D.
Net Weight
Shipping Weight

12", 304.8 mm
8 ohms
91 Hz
80 Hz - 6.2 kHz
91.5 dB (No knob turn), 100 dB (Full turn)
38 oz.
0.312", 7.92 mm
1.75", 44.5 mm

134.25, 2.2 liters
12.03", 305.5 mm
10.95", 278.1 mm
0.25", 6.4 mm
11.59", 294.3 mm
6.562", 166.6 mm
7.8 lbs., 3.54 kg
9.7 lbs., 4.39 kg

*** The average on axis output across the usable frequency range when applying 1W/1m into the nominal impedance, i.e. 2.83V/8, 4V/16. Eminence response curves are measured under the following conditions: All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software calibrated) mounted 1m from wall/baffle | 2ft x 2ft baffle is built into the wall with speaker mounted flush against a steel ring for minimum diffraction | Carver PM-120 amplifier | 2700ft3 chamber with fiberglass on all six surfaces (three with custom-made wedges).