USA! Allen Amps
ALLEN AMPLIFICATION
 
   

Mini Chassis Project


Mini Chassis Project

The possibilities are endless...


NEW! - 15-1/4" wide stainless-steel Mini Chassis Project is 6" deep and 1-3/4" tall. Features (3) 9-pin, (2) octal and optional 3rd octal or can capacitor hole. (2) inputs with (6) potentiometer holes on front along with a combination toggle/slide switch hole and pilot light hole on front. (3) 3/8" jack holes on back plus 1/2" switch/fuse holder hole and 1/4" bias jack holes. Accepts Allen TP18 or TP25 power transformer and the TO8C, TO10B, TO11C, TO22, TO26 and TO30D output transformer. Also accepts a reverb transformer, a 25W aluminum cased cathode resistor, a fuse holder and a power cord strain relief bushing. 3x15 eyelet board, 3x21 eyelet board, head and 1x10 combo cabinets available. Also check out the new Classic 10 amp.



Mini Chassis Project


 Part No.

Description

 

Price 

CHM

15-1/4" wide stainless-steel chassis (NOTE: components shown in chassis images are not included and are for illustration only)

Click for larger image
Click for larger image
Click for larger image

$49

B3

15" x 3" eyelet board with hardware

$24

B4

21" x 3" eyelet board with hardware

$30



NEW! Compact, low-cost 450V 105 degree C axial-lead electrolytics with low ESR!


SMW22

22uf 450V Samwha low ESR 105C axial 5/8"D by 1-5/8"L

$3 ea.

GSC33

33uf 450V GSC low ESR 105C axial 5/8"D by 1-7/16"L

$3 ea.

GSC47

47uf 450V GSC low ESR 105C axial 23/32"D by 1-7/16"L

$4 ea.

GSC68

68uf 450V GSC low ESR 105C axial 23/32"D by 1-5/8"L

$5 ea.

GSC100

100uf 450V GSC low ESR 105C axial 1"D by 1-3/4"L

$7 ea.

TP18

Small project power transformer

$45

TP25

PT for heavier rated single-ended or push pull amps up to 35 watts

$79

TO8C

OT for 6V6 single-ended amps with 4 or 8 ohm speaker

$39

TO10B

OT for EL84 single-ended amps with 4, 8 or 16 ohms speaker, 5K

$45

TO11C

OT for 6L6/EL34 single-ended amps with 4 or 8 ohm speaker

$45

TO22

OT for 2x6V6 push-pull amps with 4 or 8 ohm speaker

$44

TTO26

OT for 2x6V6/6L6 push-pull amps with 8 ohm speaker

$49

TO30D

OT for 2x6L6/EL34 push-pull amps with 4 or 8 ohm speaker

$54

 

Head cabinet 8-1/2" tall

$200

 

1x10 or 1x12 cabinet - 17" x 17"

$300

       

Mini Project Starter Kit
(save 20% over individual prices)


MPS

Mini Project Starter Kit:
   (1) 8 foot power cord with strain relief bushing
   (1) octal socket with retaining clip and hardware
   (1) 9-pin socket with shield and hardware
   (3) Switchcraft 1/4" female shorting jacks
   (1) Carling SPST power switch
   (1) Pilot light assembly with bulb and red jewel
   (1) Littlefuse fuse holder w/2 1A slow blow fuses
   (2) Alpha 3/8" bushing 1 meg audio potentiometers
   (2) Black, brown or cream barrel knobs

$39