USA! Allen Amps

Old Flame

Old Flame

Old Flame 2x10

New 2007 Old Flame model now available! The same classic Old Flame tone and features repackaged into a new angled-front stainless-steel chassis with new black barrel knobs. New 1x12 and 4x10 models have been added.

Output Power

40 Watts (6L6GC power tubes and GZ34 rectifier tube)
25 Watts (6V6GT power tubes and 5U4G rectifier tube).

Tube Compliment

(4) 12AX7, (2) 6L6GC and (1) GZ34.


AB push-pull with adjustable fixed bias.


Bass, treble, and midrange controls, BRIGHT switch, and RAW control.


All-tube long 3-spring medium delay tank in a heavy vinyl reverb bag with Dwell, Mix, and Tone controls. Shielded cables.

Master Volume

Post-driver using dual potentiometer and (4) coupling capacitors.


18-gage non-magnetic stainless-steel with welded corners.


Full-size (15/16") chassis-mount with 3/8" bushing, solid metal shaft, damped action.


Hand-wired point-to-point with tinned solid-core PVC wiring, G-10 glass epoxy circuit board with brass eyelets. Carbon film resistors, Mallory M150 and CDM silver mica tone capacitors, Switchcraft jacks, Carling switches, and U.S. made molded type sockets.


Cool and quiet running Allen TP40 200ma power transformer, TO40MT upgrade paper bobbin interleaved winding output transformer, TR reverb transformer and TRCH choke are all U.S. made. See the TRANSFORMERS page for details.


Design is loosely based on the mid 60's Fender Super Reverb™ but without a normal channel or a vibrato function. Design is enhanced with 3-knob reverb control, master volume control, "RAW" control, front panel power switches, impedence switch, and rear panel bias adjustment jacks.

Old Flame Head

Old Flame Head


Solid pine with black Tolex covering, black/white/silver sparkle grill, floating plywood baffleboard. (2) Tolex covered, rear screw on panels. Chrome corners, rubber-cushioned chrome glides (feet), chrome chassis straps, black-rubber (steel-reinforced) carrying handle with chrome caps, chrome screws.


Eminence Copperheads in the 2x10, Eminence Red, White and Blues in the 1x12, Eminence Legend 151 in the 1x15.

Special Features

Unique front panel "RAW" control brings up the mids scooped by the tone stack while providing a substantial gain increase. Bias adjustment jacks on rear panel provide quick and easy power tube adjustments with any DC milivolt meter. Check for correct bias and matching.

Power Cord

Black, 12-foot, 3-prong grounded heavy-duty 18/3 with strain relief bushing.

Power Switches

Front panel-mounted Carling toggle-type for AC Power and Standby.

Indicator Light

Front panel pilot-light for AC power with choice of red, green, blue, amber, or purple jeweled lens and #47 bulb.

Size and Weight

1x12 combo - 24.25"W x 18"H x 9.75"D, 48 lbs.
2x10 Combo - 24.25"W x 18"H x 9.75"D, 52 lbs.
1x15 Combo - 24.25"W x 22"H x 9.75"D, 50 lbs.
Head - 24.25"W x 10"H x 9.75"D, 35 lbs.


Old Flame Chassis Only


Old Flame Head


Old Flame 1X12 Combo


Old Flame 2X10 Combo with (2) Eminence Copperheads


Old Flame 1X15 Combo with Eminence Legend 151


Old Flame 4X10 Combo



Allen Amps Footswitch


Other Tolex and grill cloth options available at no extra charge

Now available in kit form! See the Amp Kits page.

Matching speaker cabinets available too! See the Cabinets page.

Old Flame Blue

Old Flame Blue

Old Flame 4x10

Old Flame 4x10